Yield nobody can explain
Input and output are booked at every stage, so stage-wise yield is calculated for each batch and losses show up where they happen.
Bulk drugs and intermediates made in multi-stage chemical batches
Built for bulk drug plants, from raw material and solvent receipt through reaction, work-up, crystallisation, centrifuging, drying and milling to packed and released batches, with lot-wise material status, stage-wise yield and batch records throughout.
Updated

Bulk drug manufacturing ERP is business software built around how a bulk drug plant runs. Formezy records every raw material and solvent lot from receipt and quarantine to QC approval, the quantities dispensed to each batch, stage-wise yield, recovered solvent, in-process and final QC results, and the retest date of each packed batch, so stock, cost and batch records stay current.
Input and output are booked at every stage, so stage-wise yield is calculated for each batch and losses show up where they happen.
Every lot carries a Quarantine, Under test, Approved or Rejected status, and only approved lots can be dispensed.
Fresh and recovered solvent are tracked separately, with the quantity issued, recovered and reused for every batch.
Segments
4 segments, each with its own shop-floor process flow.
Multi-step reactions in reactors, from charging raw materials and solvents to reaction completion and work-up. Record what was charged, from which lot, and the yield at every stage.
See the 8-step flowCrude product dissolved, treated, filtered and crystallised to the required purity. Track solvent and carbon issues, wet cake output and mother liquor sent for recovery.
See the 6-step flowWet cake dried, milled or micronised, sifted, blended and packed into labelled drums. Book yields, record line clearance and release each batch with its certificate of analysis.
See the 7-step flowSpent solvents and mother liquors collected, distilled and tested before reuse. Track quantities in and out, recovery percentage, and which batches used recovered solvent.
See the 6-step flowShop-floor process flow
Choose a segment, then a step. Each one shows what happens on the shop floor, what Formezy records, and what changes as a result.
Raw materials, solvents and reagents received and weighed at the gate
GRN records supplier, supplier batch no., quantity and container count; each lot gets an internal lot no. and Quarantine status
Weight Integration moduleEvery lot identified on arrival
QC samples each lot and tests it against its specification
Results recorded against the lot; status changes to Approved or Rejected, with the retest date
Quality Control moduleOnly approved lots usable
Quality gate. If it fails: the lot is marked rejected, moved to the rejected store and a return to the supplier is raised.
Approved materials weighed out for the batch in the dispensing area
Dispensed quantity booked against each lot from the scale and checked against the batch formula
Weight Integration moduleRight lot, right quantity
Materials and solvents charged to the reactor in the set sequence
Charging recorded in the batch record with time, quantity, lot and reactor number
Production & Purchase moduleBatch record built as it runs
Reaction runs at the set temperature for the set time
Temperature readings and timings captured against the batch stage, from instruments or operator entries
IoT & Automation moduleConditions on record
Sample tested for reaction completion
IPC result logged against the stage; the next step opens only after the result is entered
Quality Control moduleCompletion checked, not assumed
Quality gate. If it fails: the stage is held for review, and any extended reaction or rework is recorded against the same batch.
Quenching, extraction, layer separation and solvent distillation
Output of the stage booked; stage-wise yield calculated against the input
Production & Purchase moduleStage yield per batch
Isolated intermediate packed, labelled and moved to the intermediate store
Intermediate lot created with quantity, status and location, linked to the lots it was made from
Inventory moduleIntermediates traceable
Raw materials, solvents and reagents received and weighed at the gate
GRN records supplier, supplier batch no., quantity and container count; each lot gets an internal lot no. and Quarantine status
Weight Integration moduleEvery lot identified on arrival
Crude product or intermediate issued from the store to the purification batch
Issue allowed only from approved lots, with the quantity taken from the scale
Weight Integration moduleApproved input only
Crude dissolved in solvent, treated with activated carbon and filtered
Solvent and carbon quantities recorded against the batch; filter and equipment IDs logged
Production & Purchase moduleEvery input recorded
Solution cooled on a controlled profile to crystallise the product
Temperature readings captured against the batch with time stamps
IoT & Automation moduleCooling profile on record
Slurry centrifuged and the wet cake unloaded and weighed
Wet cake weight booked per centrifuge load; mother liquor quantity sent to solvent recovery
Weight Integration moduleWet cake per load
Wet cake sampled for purity and related substances
IPC result logged against the batch; the batch moves to drying only when the result is within limits
Quality Control modulePurity checked before drying
Quality gate. If it fails: the batch is held and can be routed for re-crystallisation, with the rework recorded against the same batch.
Reactor, filter and centrifuge cleaned after the batch
Cleaning log recorded per equipment with batch, date and person, so the equipment shows as cleaned
Machine Maintenance moduleEquipment status visible
Crude product or intermediate issued from the store to the purification batch
Issue allowed only from approved lots, with the quantity taken from the scale
Weight Integration moduleApproved input only
Wet cake dried in a tray or fluid bed dryer until loss on drying is within limit
Dryer, drying time, temperature readings and dried output weight recorded
IoT & Automation moduleDried output weighed
Dried material milled or micronised and sifted to the required particle size
Input, output and sieve rejects booked; stage yield calculated
Production & Purchase moduleMilling loss known
Sub-lots blended into one uniform batch
Blend recorded with the sub-lots used, so the final batch traces back to every sub-lot
Production & Purchase moduleOne batch, full genealogy
Packing area checked clear of previous material, labels and documents
Line clearance recorded with person, time and previous product before packing starts
Quality Control modulePacking starts clean
Quality gate. If it fails: packing does not start until the area is cleared again and re-checked.
Product packed in lined drums, weighed and labelled
Each drum weighed and numbered; labels carry batch no., manufacturing date and retest date
Weight Integration moduleDrum-wise stock
Finished batch sampled and tested against its specification
Results recorded; certificate of analysis generated from them; batch status set to Released
Quality Control moduleCOA from recorded results
Quality gate. If it fails: the batch stays on hold or is rejected, and it cannot be invoiced or dispatched.
Released drums stored, picked and dispatched
Drums issued against the sales order in order of retest date; invoice and COA go with the shipment
Logistics & Dispatch moduleBatch to customer traced
Wet cake dried in a tray or fluid bed dryer until loss on drying is within limit
Dryer, drying time, temperature readings and dried output weight recorded
IoT & Automation moduleDried output weighed
Mother liquor and spent solvent collected from batches in labelled drums or tanks
Spent solvent by batch
Spent solvent distilled in the recovery column
Input and recovered quantities recorded per distillation lot; recovery percentage calculated
Production & Purchase moduleRecovery % per lot
Recovered solvent tested for purity and water content
Results recorded against the recovered lot; status set to Approved for reuse or Rejected
Quality Control moduleOnly tested solvent reused
Quality gate. If it fails: the lot is sent for redistillation or disposal and cannot be issued to a batch.
Approved recovered solvent issued back to production
Issue booked against the recovered lot, so each batch shows how much fresh and recovered solvent it used
Inventory moduleFresh vs recovered per batch
Distillation residue sent for authorised disposal
Residue quantity and disposal document recorded against the recovery lot
Logistics & Dispatch moduleWaste quantities on record
Accounts value the solvent used in each batch
Batch cost uses actual fresh and recovered solvent quantities at their own rates
Finance moduleTrue solvent cost
Mother liquor and spent solvent collected from batches in labelled drums or tanks
Spent solvent by batch
Dashed ring marks a quality gate, where failed material is held before it moves on.
AskEzy AI
AskEzy is the AI built into Formezy. Instead of opening reports and registers, your team asks questions in plain language and gets answers from your own live Formezy data, within each person’s access rights. AskEzy also summarises reports and updates, reminds people about tasks and approvals, and flags overdue items and unusual figures.
Answers come from your own Formezy data and respect each person’s access rights.
YouWhich raw material lots are still waiting for QC approval?
AskEzyLists lots in Quarantine or Under test, with material, supplier, quantity and days since receipt.
YouWhat was the stage-wise yield of last week’s batches?
AskEzyShows the yield of each stage for every batch completed last week, from the input and output booked at each stage.
YouWhich packed batches reach their retest date in the next 60 days?
AskEzyLists those batches with stock quantity, storage location and retest date.
YouSummarise solvent recovery for this week.
AskEzySummarises spent solvent collected, recovered and reused by solvent, with the recovery percentage.
YouRemind me tomorrow morning about batches pending release.
AskEzySets a reminder for the time you choose and, when it is due, shows the batches still waiting for release.
Capabilities
Open an area to see what it covers.
Questions
Talk to a pharma ERP specialist about your own plant and process route.
Formezy supports chemical synthesis batches, purification & crystallisation, drying, milling & packing and solvent recovery, each with its own process flow. Plants that combine segments run them in one system.
AskEzy, the AI built into Formezy, answers questions in plain language from your own live data, summarises reports and updates, sends reminders and flags overdue items. For example, a bulk drug manufacturing team can ask “Which raw material lots are still waiting for QC approval?”, “What was the stage-wise yield of last week’s batches?” or “Which packed batches reach their retest date in the next 60 days?”
Yes. The input and output of every stage are booked against the batch, so Formezy calculates the yield of each stage and of the whole batch, and shows where material was lost.
Yes. Every lot carries a status from receipt: Quarantine, Under test, Approved or Rejected. Dispensing and issue screens only allow approved lots.
Spent solvent is booked from each batch, distilled in recovery lots and tested. Approved recovered solvent goes back to stock as its own lots, so you can see the recovery percentage and how much recovered solvent each batch used.
Yes. QC results are recorded against the batch, and the certificate of analysis is generated from those results, so the COA matches the record.
Revised Schedule M sets good manufacturing practice requirements for Indian drug makers. Formezy records the data those requirements ask you to keep, such as material status, batch records, equipment cleaning logs and QC results. It does not certify or guarantee compliance; that stays with your quality team.
Yes. Each batch stores its manufacturing and retest dates. Stock is issued in order of retest date, and AskEzy can flag batches approaching it.
Guides
Other industries
See Formezy configured around your own process route, from receipt to dispatch.