Book a demo

Cosmetics

Cosmetics manufacturing ERP: formulas, batches and shelf life

Illustration of cream jars, pump bottles and tubes on shelves beside a tablet showing a checklist

A cosmetics plant can look simpler than a pharmaceutical one, but its records are just as demanding. A single cream base may be filled into five pack sizes for three brands, each with its own artwork. Fragrances and botanical extracts carry their own shelf life. Brand owners want their formulas kept private, and retailers want to know which batch is in which carton. This article covers what a cosmetics and personal care manufacturer should record, and how an ERP keeps it together.

Formulas that stay confidential

The formula is the most valuable thing a cosmetics company owns, and for contract manufacturers it belongs to the brand. Keep each formula as a controlled version, with a record of who approved it and when. People who make the batch need quantities for the batch size in front of them, not the master formula. In Formezy, formulas are stored with access rights, so you decide who can open them, while the batch sheet issued to the floor shows only what is needed to make that batch.

One bulk, many packs: multi-level bills of materials

A typical product has at least three levels: the bulk cream or shampoo, the filled pack (bulk plus tube, cap, label and carton), and the shipper that holds a dozen or more packs. A multi-level bill of materials links them, so planning one order for finished packs works out how much bulk to make and how many tubes, caps, labels and cartons to issue. When a brand changes its carton, only that level of the bill of materials changes.

Material lots and status

Every oil, emulsifier, preservative, colour, fragrance and packaging material should get a lot number at receipt, with the supplier’s lot, COA and expiry date. Keep each lot in quarantine until it has been checked, then approve or reject it. Only approved lots should be issued to a batch. Fragrances deserve special care: they are expensive, sensitive to storage and often bought in small lots, so knowing which fragrance lot went into which batch matters when a customer reports a change in smell.

Batch records and bulk checks

Record what actually happened for each batch: the formula version, the lots and weights dispensed, phase temperatures and mixing times, and the bulk checks such as pH, viscosity, colour and fragrance. Do not let filling start until the bulk is approved. In Formezy, scale weights can be booked straight against the batch, mixing readings can come from the vessel, and the bulk check acts as a gate before filling.

Filling, fill weights and packing reconciliation

Under-filled packs cost you complaints, and over-filled packs cost you margin. Check fill weights at set intervals on every line and record them against the batch and time, with readings outside the limits highlighted. Then reconcile packaging: tubes, labels and cartons issued, used, rejected and returned. Printed packaging that cannot be accounted for is a risk when a brand changes its artwork.

Shelf life from bulk to pack

Manufacturing and expiry dates should follow the batch from bulk to filled packs, and appear on every invoice and dispatch. That lets you issue stock oldest-expiry first, warn distributors before stock runs short of shelf life, and keep retained samples and stability checks linked to the batch they came from.

Working for many brands

Contract and private-label manufacturers need everything kept per brand: formulas, approved artwork, the packaging or ingredients the brand supplies itself, job-wise costing and dispatch. When brand-owned stock is kept separately, you can tell a brand exactly how many of its cartons are left with you, and invoice its job with the real cost of materials, packing and labour.

Traceability and complaints

When a retailer or a brand reports a problem, the question is always the same: which batch, which materials and who else received it? If every dispatch carries batch numbers and every batch carries its material lots, the answer is one search instead of a week of paperwork.

Where to start

Most cosmetics plants start with material lots and status, formulas and bills of materials, and batch-wise dispatch, then add fill checks, machine counts and costing. Formezy has process flows for creams, lotions and gels, hair, bath and body care, fragrances and flavours, and contract manufacturing. See the cosmetics and personal care ERP page for the step-by-step flows, or book a demo to walk through them with your own products.

See Formezy on your own process

Book a demo tailored to your segment.

CallWhatsAppBook a demo
Chat